横向扰动对超声速混合层被动标量混合影响分析

采用大涡模拟数值计算二维空间发展的超声速混合层,重点分析横向扰动对混合层的标量结构、标量厚度以及标量体积卷吸率的影响。采用理论模型验证了数值方法在计算标量混合特性方面的准确性。结果表明,横向扰动频率和振幅明显影响着混合层的标量增长率和卷吸率。高频扰动增大了混合层近场标量增长率和卷吸率,但是低频扰动改善了混合层远场标量增长率。大尺度涡卷吸过程对混合层标量卷吸率起决定作用。多频扰动有效地增强了超声速混合层的标量混合。     

武器装备LCC分析的基本原理

介绍了寿命周期费用(LCC)分析的基本概念及操作程序,给出了武器装备寿命周期费用的一般构成体系,讨论了LCC分析在武器装备应用中需要注意的问题,并对其未来发展方向作了展望.     

函数变换提高灰色预测模型精度的条件

指出选择函数变换来提高模型精度主要与三个方面的因素有关：提高数据序列的光滑比、调整数据序列的级比和确保凸凹性。在调整级比方面，扩充了级比压缩变换的相关定理，并讨论了几种常用的函数变换在上述三个方面的关系。最后结合实例提出，对于变换后的数据序列若不满足这三方面的要求可以再进行函数变换以达到提高模型精度的目的。     

精确制导弹药低成本制导控制系统设计

针对精确制导弹药制导控制系统低成本的迫切需求,提出了一种弹载低成本制导控制系统设计方法。建立了一种弹载制导控制系统低成本体系架构,从功能、硬件、软件等方面对其进行了GNC一体化设计,并在此基础上提出了一种基于ARM处理器的一体化制导计算机设计方法。针对MEMS导航系统精度低、噪声大特点,设计了一种惯性/卫星数字制导方案。该低成本制导控制系统设计方法可有效减少系统冗余硬件,降低成本,实现较高的制导控制精度,满足未来低成本精确制导武器的需求。     

The long term effects of an aging fleet on operational availability and cost: evidence from the U.S. coast guard

This paper empirically examines whether the aging of a fleet affects operational availability and operating cost using a unique data-set on the 117 47-foot Motor Lifeboats (MLBs) of the United States Coast Guard (USCG). Procured from 1997 to 2003, the 47-foot MLB is the standard lifeboat of the USCG and all 117 MLBs remain in service. The aging of the MLB fleet has resulted in higher annual operating costs and lower operational availability, although the nature of this relationship remains unclear. Our estimation strategy utilizes an error components estimator to examine these issues. We employ three variants of the dependent variables (i.e. the standard logarithmic transformation as is most commonly seen in the literature, inverse hyperbolic sine [IHS], and level outcomes). The point estimates from the standard logarithmic model finds operational availability for the MLBs decreases at a rate between 0.83 and 1.8% per year and cost increases at a rate between 0.33 and 7.81% per year. Similar effects are shown with the IHS and level outcome specifications. In terms of nonlinearity effects, we find the most pronounced changes in operational availability and cost occur for MLBs aged 15 years or more (in comparison to younger MLBs).     

基于不稳定性采样的主动学习方法

传统的主动学习方法往往仅基于当前的目标模型来挑选样本,而忽略了历史模型所蕴含的对未标注样本预测稳定性的信息。因此,提出基于不稳定性采样的主动学习方法,依据历史模型的预测差异来估计每个未标注样本对提高模型性能的潜在效用。该方法基于历史模型对样本的预测后验概率之间的差异来衡量无标注样本的不稳定性,并挑选最不稳定的样本进行查询。在多个数据集上的大量实验结果验证了方法的有效性。     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

舰载预警直升机机载雷达有效探测距离模型＊

针对机载雷达最大作用距离这一参数难以满足舰载预警直升机部署决策需求的问题,建立了舰载预警直升机与目标接近到某一相对距离时,机载预警雷达发现目标的概率分布模型,并给出了对特定目标满足给定发现概率和建航概率的有效探测距离计算模型,为针对不同目标预警时,舰载预警直升机的阵位配置研究提供了可靠依据。     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

一种鱼雷自导信号频率检测方法研究

靶场在进行智能鱼雷鉴定试验任务时,实时准确地检测出鱼雷自导信号的频率成分是靶标信号处理中的重要环节,谱线比值法便是靶标进行信号处理时检测信号频率的一种有效方法。本文介绍了谱线比值法的基本原理,针对目前鱼雷自导信号特点,对该方法提出了改进方案并进行了仿真。仿真结果表明,经改进的谱线比值法能够满足靶标检测复杂鱼雷自导信号体制下信号频率的使用要求。